DEHNpatch

Patch cable with built-in surge protection
Cat. 6 according to ISO/IEC 11801
CAT 6A in the channel according to ANSI/TIA/EIA-568
Power over Ethernet (PoE+ according to IEEE 802.3at)
Easy to retrofit

DEHNpatch is the first Cat. 6A certified patch cable with built-in surge protection that can be used according to IEEE 802.3at for voltages up to 57 V.

Details

GHMT certificate DPA M CAT6 RJ45S 48

GHMT certificate DPA M CAT6 RJ45H 48

Designed as a patch cable, DEHNpatch is easy to install. It is equally suited for use in new installations or retrofitting into existing installations with little effort.
DEHNpatch is simply plugged in between the patch panel and the active component (a switch for example) instead of the conventional patch cable. The snap-in mechanism of the supporting foot allows the device to be safely earthed via the DIN rail. For single applications, delivery includes a piece of DIN rail and fixing material. For multiple applications in 19“ distribution boards, the DEHNpatch mounting set should be used which is available as accessory.
DEHNpatch fulfils the requirements of Category 6 and can be universally used for all data services up to nominal voltages of 57 V. It is well suited for existing services in offices and industrial environments such as Gigabit Ethernet, ATM or ISDN as well as future services such as Voice over IP and Power over Ethernet.
Due to its fully shielded design, DEHNpatch can be used in shielded and unshielded networks. Its width is similar to that of an RJ45 socket, allowing up to 24 devices to be installed next to one another in one series and to be integrated into a 19" rack.
DEHNpatch with a total patch cable length of 3 m and 5 m is supplied as standard (other lengths available on request).

Further Models / Accessory:

DPA M CAT6

DEHNpatch Class E  

Accessories

DPA M CAT6

Basic circuit diagram DPA M CAT6 RJ45

Dimension drawing DPA M CAT6 RJ45

Universal arrester for Industrial Ethernet, Power over Ethernet (PoE+ according to IEEE 802.3at up to 57 V) and similar applications in structured cabling systems according to Cat. 6 and class E_Aup to 500 MHz. Fully shielded type for DIN rail mounting.
Accessories: Earthing bracket with flat connector sleeve

Ideally suited for retrofitting, protection of all lines
CAT 6A in the channel according to ANSI/TIA/EIA-568

Power over Ethernet (PoE+ according to IEEE 802.3at)
For installation in conformity with the lightning protection zones concept at the boundaries from 0_B –2 and higher

Type
Part No.
SPD class
Nominal voltage	U_N
Max. continuous operating d.c. voltage	U_c
Max. continuous operating a.c. voltage	U_c
Max. continuous d.c. voltage pair-pair (PoE)	U_c
Nominal current	I_L
C2 Nominal discharge current (8/20 µs) line-line	I_n
C2 Nominal discharge current (8/20 µs) line-PG	I_n
C2 Total nominal discharge current (8/20 µs) line-PG	I_n
C2 Nominal discharge current (8/20 µs) pair-pair (PoE)	I_n
Voltage protection level line-line for I_nC2	U_P
Voltage protection level line-PG for I_nC2	U_P
Voltage protection level line-line for I_n C2 (PoE)	U_P
Voltage protection level line-line at 1 kV/µs C3	U_P
Voltage protection level line-PG at 1 kV/µs C3	U_P
Voltage protection level pair-pair at 1 kV/µs C3 (PoE)	U_P
Insertion loss at 250 MHz
Capacitance line-line	C
Capacitance line-PG	C
Operating temperature range
Degree of protection
For mounting on
Connection (input/output)
Pinning
Connecting lead
Connector
Earthing via
Enclosure material
Colour
Test standards
Transmission class according to ISO/IEC 11801
Transmission class according to EN 50173-1
Transmission class according to ANSI/TIA/EIA-568
Approvals
Accessories
Weight
GTIN
PU
Amount
Further Pictures
Options

DPA M CAT6 RJ45S 48	DPA M CAT6 RJ45H 48
929 100	929 110
T	T
48 V	48 V
48 V	48 V
34 V	34 V
57 V	57 V
1 A	1 A
150 A	150 A
2.5 kA	2.5 kA
10 kA	10 kA
150 A	150 A
≤ 190 V	≤ 190 V
≤ 600 V	≤ 600 V
≤ 600 V	≤ 600 V
≤ 145 V	≤ 145 V
≤ 500 V	≤ 500 V
≤ 600 V	≤ 600 V
≤ 2 dB	≤ 3 dB
≤ 165 pF	≤ 250 pF
≤ 255 pF	≤ 400 pF
-20°C ...+60°C	-20°C ...+60°C
IP 20	IP 20
35 mm DIN rails acc. to EN 60715	35 mm DINs rail acc. to EN 60715
RJ45 connecting lead / RJ45 connecting lead	RJ45 connecting lead / RJ45 connecting lead
1/2, 3/6, 4/5, 7/8	1/2, 3/6, 4/5, 7/8
A = approx. 0.5 m, G = approx. 3 m ^*)	A = approx. 1 m, G = approx. 5 m^*)
Stewart 39 series	Hirose TM 21P
35 mm DIN rail acc. to EN 60715	35 mm DIN rail acc. to EN 60715
zinc die casting	zinc die casting
bare surface	bare surface
IEC 61643-21 / EN 61643-21	IEC 61643-21 / EN 61643-21
Cat. 6	Cat. 6
Class E_A	Class E_A
cat. 6A in the channel	cat. 6A in the channel
GHMT, GOST	GHMT, GOST
fixing material	fixing material
244 g	320 g
4013364102170	4013364105232
1 pc(s)	1 pc(s)
pc(s)	pc(s)

Further Information	Further Information

*) Special lengths on request

Further Information
	Product Specifications (Text)
	Product Specifications (PDF)
	Installation Instructions

Certificates
	CE_DEHNpatch
	GHMT 929100

Further Information
	Product Specifications (Text)
	Product Specifications (PDF)
	Installation Instructions

Certificates
	CE_DEHNpatch
	GHMT 929110

DEHNpatch Class E

Basic circuit diagram DPA CLE

Dimension drawing DPA CLE

Universal arrester ideally suited for Industrial Ethernet, Power over Ethernet (PoE+ acc. to IEEE 802.3at up to 57 V) and similar applications in structured cabling systems according to class E up to 250 MHz. Protection of all pairs by means of powerful gas discharge tubes and one adapter filter matrix per pair. Fully shielded adapter with sockets for DIN rail mounting.
Accessories: Earthing bracket with flat connector sleeve

Ideally suited for retrofitting, protection of all lines
Cat. 6 in the channel (class E)

Power over Ethernet (PoE+ according to IEEE 802.3at)
For installation in conformity with the lightning protection zones concept at the boundaries from 0_B –2 and higher

Type
Part No.
SPD class
Nominal voltage	U_N
Max. continuous operating d.c. voltage	U_c
Max. continuous operating a.c. voltage	U_c
Max. continuous d.c. voltage pair-pair (PoE)	U_c
Nominal current	I_L
C2 Nominal discharge current (8/20 µs) line-line	I_n
C2 Nominal discharge current (8/20 µs) line-PG	I_n
C2 Total nominal discharge current (8/20 µs) line-PG	I_n
C2 Nominal discharge current (8/20 µs) pair-pair (PoE)	I_n
Voltage protection level line-line for I_nC2	U_P
Voltage protection level line-PG for I_nC2	U_P
Voltage protection level line-line for I_n C2 (PoE)	U_P
Voltage protection level line-line at 1 kV/µs C3	U_P
Voltage protection level line-PG at 1 kV/µs C3	U_P
Voltage protection level pair-pair at 1 kV/µs C3 (PoE)	U_P
Insertion loss at 250 MHz
Capacitance line-line	C
Capacitance line-PG	C
Operating temperature range
Degree of protection
For mounting on
Connection (input/output)
Pinning
Earthing via
Enclosure material
Colour
Test standards
Approvals
Accessories
Weight
GTIN
PU
Amount
Further Pictures
Options

DPA M CLE RJ45B 48
929 121
T
48 V
48 V
34 V
57 V
1 A
150 A
2.5 kA
10 kA
150 A
≤ 190 V
≤ 600 V
≤ 600 V
≤ 180 V
≤ 500 V
≤ 600 V
≤ 3 dB
≤ 30 pF
≤ 25 pF
-40°C ...+80°C
IP 10
35 mm DIN rails acc. to EN 60715
RJ45 socket / RJ45 socket
1/2, 3/6, 4/5, 7/8
35 mm DIN rail acc. to EN 60715
zinc die casting
bare surface
IEC 61643-21 / EN 61643-21
CSA, UL, GOST
fixing material
123 g
4013364118935
1 pc(s)
pc(s)

Further Information

Further Information
	Product Specifications (Text)
	Product Specifications (PDF)
	Installation Instructions

Certificates
	215727_2479911
	COC 20110222 E156818 Vol 1 Sec 6
	CE_DEHNpatch
	Summary YellowLine LGA

Accessories

Mounting Set for DEHNpatch

The set comprises a DIN rail for up to 24 DEHNpatch devices and different distance bolts with sliding nuts for installation into data distributors. To save space, the DIN rail can be mounted at the distributor panel or even upstream of the mounting sections in a 19" grid dimension.

Type
Part No.
Weight
GTIN
PU
Amount
Options

MS DPA
929 199
350 g
4013364103313
1 pc(s)
pc(s)
Further Information