Step 1: Selection mode

Selection mode

First select
a. Product view or
b. System view

If you already know which cable cross-section and clamps are to be used, the easiest way is to select the product view. In the system view the parameters of the switchgear installation are entered, for example the maximum short-circuit current. Whether product or system view – both solutions lead to an optimal earthing and short-circuiting device.		 next
space
go 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
  •                            

Close window X

  

Step 2: Basic structure

Basic structure

Define the basic structure of the earthing and short-circuiting device.

 next
space
go 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
      •                        

Close window X

  

Step 3: Phase-side cable cross-section

Phase-side cable cross-section 1

Select the phase-side cable cross-section of the short-circuiting cables.

 next
space
go 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
          •                    

Close window X

  

Step 4: Earth-side cable cross-section

Earth-side cable cross-section

Decide whether the earth-side cables should have the same cable cross-section or a reduced cable cross-section.

 next
space
go 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
              •                

Close window X

  

Step 5: Phase-side equipment

Phase-side equipment

Select the shaft type and clamp to be used on the phase side.

 next
space
go 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
                  •            

Close window X

  

Step 6: Earth-side equipment

Earth-side equipment

Select the earth-side operation and clamp.

 next
space
go 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
                      •        

Close window X

  

Step 7: Earthing stick

Earthing stick

Optional earthing sticks are available as accessory in different lengths and versions.

 next
space
go 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
                          •    

Close window X

  

Step 8: Print pdf of your selection

Result

You can print the result of your selection, send it via e-mail or add it to the shopping cart. You may certainly return to your selection to make changes.

 space
go 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
                              •

Close window X

  
DEHN + SÖHNE

Online configurator

8 Schritte zur Konfiguration

Earthing and short-circuiting devices in 8 steps:
with the new earthing and short-circuiting configurator:

go Demo

 

Safe Working on Electrical Installations

go Download brochure PDF [1.1 MB]

Easy configurationEasy online configuration of earthing and short-circuiting devices

The new earthing and short-circuiting configurator allows easy, quick and safe online configuration of your earthing and short-circuiting device. Quickly select the right earthing and short-circuiting device for your application via the intuitive menu navigation. The configuration of the connecting parts and earthing cables is precise and perfectly harmonised.

The variant number allows to clearly identify the finished product and order it at a later date. You may also use the Part No. of your previous orders for configuration.

The result of your selection can be added to the shopping cart, sent via email or printed. The technical data of the product are directly linked - online and thus always up to date.

The earthing and short-circuiting configurator – simple as never before!

There are three possibilities for a fast selection:

Start the configurator:
Select the cable cross-section, shaft type, clamp, operation and earthing stick in just a few steps.

Enter the variant number, start the configurator:
If you enter the variant number, an earthing and short-circuiting device is displayed that can be modified at any time.

Enter the Part No., start the configurator:
"Old" Part Nos. from previous orders can be used to configure your usual earthing and short-circuiting device – with a new variant number.

 

START:

 

The earthing and short-circuiting configurator opens in a new browser window (if this doesn't work, please deactivate the pop-up blocker in the "Settings" menu).